IOIUSB | USB3A-LC01E | USB 3.0 Fiber Extender | USB 3.0 over Fiber optical

USB3A-LC01E

USB 3.0 SuperSpeed only (5Gbps) to Duplex LC Optical Transceiver

USB3A-LC01E

Highlights

  • Extends USB 3.0 devices up to 200 m
  • Uses standard Singlemode (OS2) or Multimode (either OM3 or OM2) Fiber Optic Patch LC to LC Cable
  • Supports USB 3.0 SuperSpeed (5Gbps)
  • Not backward compatible with USB 2.0
  • RoHS Compliant

Introduction

USB3A-LC01E is USB 3.0 SuperSpeed only (5Gbps) to Duplex LC Optical Transceiver. It contains U3AF-SFPT1 for UFP (Up Facing Port) and SFPT-U3API01E for DFP (Down Facing Port) with USB Bus-Power Injector.
It's a high performance Optical Transceiver for USB 3.0 SuperSpeed only (5Gbps) application.

The transmitter consists of high-performance 1310nm MQW DFB structure laser in the Optical Subassembly (OSA), which is housed within a metal package. In addition, this component is also class 1 laser compliant with according to International Safety Standard IEC-60825 and FDA 21 CFR 1040.10 and 1040.11

The receiver contains of a GaAs PIN photodiode coupled to a high sensitivity Transimpedance Amplifier (TIA) in an OSA. This OSA combination is mated to a post amplifier IC that provides the post amplification SD (Signal Detection) or LOS (Loss of Signal) indication circuit, which provides logic low state output when a link optical signal level is detected.

Depending on the host and devices (cameras or storage drives), the distance connection can be in the range between 150-200m. This USB 3.0 long distance solution of U3AF-SFPT1 has to be used with SFPT-U3API01E and standard Multimode Fiber Optic Patch LC to LC Cable.

No additional software or drivers are needed.

Technical Specifications

U3AF-SFPT1

Upstream Connector
  • USB 3.0 cable ports (Standard A-type Receptacle),TID# 360000003
    Provides USB 3.0 Vision Standard cable port lock mechanism
Downstream Connector
  • Duplex LC Single-mode Optical Connector
Power
  • It is USB Bus-Power (5V)
International Safety Standard
  • Class 1 Laser International Safety Standard IEC 825 Compliant.
    Complies with EN60825-1 and FDA 21 CFR 1040.10 and 1040.11
Dimensions
  • 27 x 73.8 x 21 mm

SFPT-U3API01E

Upstream Connector
  • Duplex LC Single-mode Optical Connector
Downstream Connector
  • USB 3.0 cable ports (Standard A-type Receptacle),TID# 360000003
    Provides USB 3.0 Vision Standard cable port lock mechanism
Power Supply
  • Power Input Range DC 9 ~ 24V (max. 5.0A)
    • E1: Walkman-type 2.0 mm DC Jack
    • E2: MINI-COMBICON Header
  • SFPT-U3API01E1 SFPT-U3API01E2
LED
  • Power LED
  • SFP Link LED
International Safety Standard
  • Class 1 Laser International Safety Standard IEC 825 Compliant.
    Complies with EN60825-1 and FDA 21 CFR 1040.10 and 1040.11
Dimensions
  • 96.6 x 66.4 x 26 mm

Application